Water Source Heat Pumps (WSHP)

Islandaire Water Source Heat Pumps (WSHP)Islandaire designs and manufactures water source heat pumps (WSHP). These models can be used for direct replacement of McQuay, Singer and Climate Master units or in new construction projects. A downloadable Water Source Product Catalog can be found here.

EZ Series V8

EZ Series V8 Image

This appliance is intended for new construction or replacement of Climate Master 816 water source heat pumps. No field modification kits or builder renovations are required. Islandaire “The Perfect Fit” units are designed to exactly replace the original, existing chassis! Islandaire units are designed for optimal efficiency and reliability. This unit has the same connection locations, and by using the existing blower section and existing cabinet, time and money is saved! Please confirm that the electrical rating of this appliance matches the electrical supply available before beginning installation.

Literature

            

Accessories

ecowave  ecoinsight

  • Cooling from: 7700-18500 Btu
  • Heating: 6300-18500 Btu
  • Comfort & Dehumidification

    • Quiet operation
    • Intuitive digital or analog controls
    • Even heat monitoring checks room temperature and automatically adds a heat boost if necessary
    • Separate thermostat settings (limiting) for cooling and heating modes (digital only)
    • Samples the room temperature in intervals to monitor and maintain desired temperature
    • Optional constant fan mode for additional comfort options
    • Reversible indoor air louvers for an additional airflow direction option
  • Sound Reduction Technology

    • New 2-motor design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
    • The quiet, efficient compressor is mounted on vibration isolators, which absorb vibration-causing noise
    • Permanently lubricated dual motors reduce noise
    • Fan turns on before the compressor starts to muffle the sound
    • High-density insulation helps keep outdoor noise outside
  • Commercial Grade Construction

    • Islandaire’s advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
    • Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
    • Stainless Steel endplates on hydronic coil
    • Indoor coil frost sensor protects the compressor
    • Permanently lubricated fan motors
    • Tamper-resistant grille
    • Durable, powder coat paint finish
  • Health and IAQ

    • Fresh-air vent
    • Washable, antimicrobial filters
  • Energy Usage: Management

    • High energy efficient design
    • Set separate heat and cool range limits
    • Desk control ready
    • Energy Management System Compatible
  • Maintenance and Installation Features

    • Service error codes for quick diagnostics
    • Nationwide Service Network
    • Modular design and pop out wiring modules

EZ Series V8

EZ Series V8 Image

This appliance is intended for new construction or replacement of Climate Master 816 water source heat pumps. No field modification kits or builder renovations are required. Islandaire “The Perfect Fit” units are designed to exactly replace the original, existing chassis! Islandaire units are designed for optimal efficiency and reliability. This unit has the same connection locations, and by using the existing blower section and existing cabinet, time and money is saved! Please confirm that the electrical rating of this appliance matches the electrical supply available before beginning installation.

Literature

            

Accessories

ecowave  ecoinsight

  • Cooling from: 7700-18500 Btu
  • Heating: 6300-18500 Btu
  • Comfort & Dehumidification

    • Quiet operation
    • Intuitive digital or analog controls
    • Even heat monitoring checks room temperature and automatically adds a heat boost if necessary
    • Separate thermostat settings (limiting) for cooling and heating modes (digital only)
    • Samples the room temperature in intervals to monitor and maintain desired temperature
    • Optional constant fan mode for additional comfort options
    • Reversible indoor air louvers for an additional airflow direction option
  • Sound Reduction Technology

    • New 2-motor design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
    • The quiet, efficient compressor is mounted on vibration isolators, which absorb vibration-causing noise
    • Permanently lubricated dual motors reduce noise
    • Fan turns on before the compressor starts to muffle the sound
    • High-density insulation helps keep outdoor noise outside
  • Commercial Grade Construction

    • Islandaire’s advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
    • Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
    • Stainless Steel endplates on hydronic coil
    • Indoor coil frost sensor protects the compressor
    • Permanently lubricated fan motors
    • Tamper-resistant grille
    • Durable, powder coat paint finish
  • Health and IAQ

    • Fresh-air vent
    • Washable, antimicrobial filters
  • Energy Usage: Management

    • High energy efficient design
    • Set separate heat and cool range limits
    • Desk control ready
    • Energy Management System Compatible
  • Maintenance and Installation Features

    • Service error codes for quick diagnostics
    • Nationwide Service Network
    • Modular design and pop out wiring modules