PTAC & PTHP

Islandaire PTAC unitsIslandaire designs and manufactures a vast selection of thru-the-wall packaged terminal air conditioners and heat pumps (PTAC & PTHP). These models can be used for direct replacements or for new construction projects in industries including hotel, healthcare, schools/universities, and modular designs. A downloadable Product Catalog can be found here.

EZ Series G3

EZ Series G3 Image

Islandaire EZ Series G3 is a special design 38.5″ by 16″ gas fired PTAC. The GS model utilizes gas heat to create high efficiency warmth for your home, with a lifetime warranty on the heat exchanger part. This model can be used for replacement or new construction projects. Our commercial duty construction with heavy gauge galvanized steel and superior components create an efficient reliable unit. This design eliminates the need for any interior or exterior renovation. Available to work with either natural gas heat or liquid propane heat.

Literature

     

Accessories

ecowave  ecoinsight

Available in liquid propane heat and natural gas heat models

  • Cooling from: 7000-15000 Btu
  • Heating: 10200-20000 Btu
  • Comfort & Dehumidification

    • Quiet operation
    • Simple yet intuitive controls
    • The unit monitors room temperature and provides heat as needed (freeze protection)
    • Separate thermostat settings (limiting) for cooling and heating nodes
    • Samples the room temperature every 9 minutes to monitor and maintain desired temperature
    • Optional constant fan mode for additional comfort options
    • The fan will not turn on until the unit’s heat exchanger has warmed up, eliminating the discomfort of cold air being brought into the room
  • Sound Reduction Technology

    • New fan design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
    • The unit compressor is mounted on vibration isolators, which absorb vibration-causing noise
    • Permanently lubricated motors reduce noise
    • New tangential fan moves air over a wider area so it’s quieter
    • Fan turns on before the compressor starts to muffle the sound
    • High-density insulation helps keep outdoor noise outside
  • Durability

    • Advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
    • Steel front cover system which attaches securely
    • Room Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
    • Overload on compressor protects its electrical systems
    • Stainless Steel endplates on both indoor and outdoor coil
    • Indoor air sensor protects the compressor
    • Permanently lubricated fan motors
    • Tamper-resistant grille
    • Durable, powder coat paint finish
    • Life time warranty on the stainless steel heat exchanger
  • Health and IAQ

    • Fresh-air vent (motorized is optional)
    • Washable, antimicrobial filters
  • Energy Usage: Management

    • Gas heat is highly efficient in comparison to electric heat
    • Set separate heat and cool range limits
    • Controls can integrate with most remote thermostat systems that are energy conscious
  • Maintenance and Installation Features

    • Service error codes
    • Reversible indoor air louvers
    • Improved weather barrier
    • Nationwide Service Network
    • Modular design and pop out wiring modules

EZ Series G3

EZ Series G3 Image

Islandaire EZ Series G3 is a special design 38.5″ by 16″ gas fired PTAC. The GS model utilizes gas heat to create high efficiency warmth for your home, with a lifetime warranty on the heat exchanger part. This model can be used for replacement or new construction projects. Our commercial duty construction with heavy gauge galvanized steel and superior components create an efficient reliable unit. This design eliminates the need for any interior or exterior renovation. Available to work with either natural gas heat or liquid propane heat.

Literature

     

Accessories

ecowave  ecoinsight

Available in liquid propane heat and natural gas heat models

  • Cooling from: 7000-15000 Btu
  • Heating: 10200-20000 Btu
  • Comfort & Dehumidification

    • Quiet operation
    • Simple yet intuitive controls
    • The unit monitors room temperature and provides heat as needed (freeze protection)
    • Separate thermostat settings (limiting) for cooling and heating nodes
    • Samples the room temperature every 9 minutes to monitor and maintain desired temperature
    • Optional constant fan mode for additional comfort options
    • The fan will not turn on until the unit’s heat exchanger has warmed up, eliminating the discomfort of cold air being brought into the room
  • Sound Reduction Technology

    • New fan design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
    • The unit compressor is mounted on vibration isolators, which absorb vibration-causing noise
    • Permanently lubricated motors reduce noise
    • New tangential fan moves air over a wider area so it’s quieter
    • Fan turns on before the compressor starts to muffle the sound
    • High-density insulation helps keep outdoor noise outside
  • Durability

    • Advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
    • Steel front cover system which attaches securely
    • Room Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
    • Overload on compressor protects its electrical systems
    • Stainless Steel endplates on both indoor and outdoor coil
    • Indoor air sensor protects the compressor
    • Permanently lubricated fan motors
    • Tamper-resistant grille
    • Durable, powder coat paint finish
    • Life time warranty on the stainless steel heat exchanger
  • Health and IAQ

    • Fresh-air vent (motorized is optional)
    • Washable, antimicrobial filters
  • Energy Usage: Management

    • Gas heat is highly efficient in comparison to electric heat
    • Set separate heat and cool range limits
    • Controls can integrate with most remote thermostat systems that are energy conscious
  • Maintenance and Installation Features

    • Service error codes
    • Reversible indoor air louvers
    • Improved weather barrier
    • Nationwide Service Network
    • Modular design and pop out wiring modules